DPM for CANIK METE SFT 4.46″ BARREL 9mm

About the DPM for CANIK METE SFT 4.46″ BARREL 9mm by DPM Systems:

This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the gun. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame. 

The system includes 5 external springs,  2 x 1.05 mm  wire diameter (long set) and 3  x 1.1mm  wire diameter (shorter set), all with different power rates.

And 2 different spring plugs, 1 silver and 1 black oxide coated. 

The long set (1.05mm WD) is softer than the short set (1.1mm WD), following below are their power rates table.

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.**  

Will Fit: CANIK METE SFT 4.46″ BARREL 9MM

Pound Ratings

Soft Springs 1.05mm  (long set)

Slide on the battery 

• Short Spring: 3.5 kg / 7.7 lbs
• Long Spring: 3.9 kg / 8.6 lbs 

Standard Springs 1.10 mm  (short set)

Slide on the battery 

• Short:  4 kg / 8.8 lbs
• Medium: 4.4 kg / 9.7 lbs
• Long:  4.7 kg / 10.3 lbs  

Slide full open position

• Silver Plug: 14lbs
• Black Plug: 18lbs

Overall Advantages 

• • Faster follow up shots
  • Improved firing speed
  • Slide and Frame Protection
  • Elimination of jams
  • Significant recoil reduction
  • Better double-tap concentration
  • Better control and greater accuracy

*Dimensions of the spring are the same as the original.