DPM Recoil Reduction Spring for CZ P-09 and P-09F NOCTURNE 4.53″ BARREL

About the DPM Recoil Reduction Spring for CZ P-09 and P-09F NOCTURNE 4.53″ BARREL:

Will Fit: CZ P-09 and P-09F NOCTURNE Barrel 4.53  – 9mm /.40s&w

CZ P-09 Recoil Spring Assembly Instructions

The DPM CZ P-09 Recoil Reduction Spring Rod by DPM Systems replaces the original factory guide rod/spring system and produces an advanced recoil reduction by absorbing the shock gradually and slowing the slide down before its impact with the frame of the pistol. Because the system is an interior modification of your pistol it will not change the external dimensions of the handgun, therefore there is no for a new holster, sights or any other accessory you own.

The DPM CZ P-09 recoil spring system works due to its multi spring rod design (three springs) by producing an advanced recoil reduction technique by gradually slowing the slide down before impacting the frame of the pistol using Spring No. 1 (see fig. below) and Spring No. 2. The third spring (Spring No. 3) which is contained within the rod itself controls the movement of the slide so it never rams on the frame.

The spring plug must always be installed when the DPM Recoil Rod and springs are used.

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.** 

Power Rates

Slide on the battery (idle position)

• Short Spring: 8.15lbs
• Medium Spring: 8.7lbs
• Long Spring: 9.25lbs

Slide full open position

• Short Plug: 19lbs (approx.)
• Long Plug: 25lbs (approx.)

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Made in Greece – EU.

*Dimensions of the spring are the same as the original.