DPM Special Edition For SIG P365XL SPECTRE COMP – SOFT VERSION

About the DPM Special Edition For SIG P365XL SPECTRE COMP & XMACRO – SOFT VERSION Recoil Reduction Spring Rod by DPM Systems:

Will Fit: SIG P365XL SPECTRE COMP & XMACRO – SOFT VERSION

Sig Sauer P365XL SPECTRE COMP & XMACRO – SOFT VERSION Recoil Spring Assembly Instructions

The Special Edition For SIG P365XL SPECTRE COMP & XMACRO – SOFT VERSION  Recoil Reduction Spring Rod by DPM Systems replaces the original factory guide rod/spring system and produces an advanced recoil reduction by absorbing the shock gradually and slowing the slide down before its impact with the frame of the pistol. Because the system is an interior modification of your pistol it will not change the external dimensions of the handgun, therefore there is no for a new holster, sights or any other accessory you own.

The DPM  SIG P365XL SPECTRE COMP & XMACRO – SOFT VERSION recoil spring system works due to its multi spring rod design (three springs) by producing an advanced recoil reduction technique by gradually slowing the slide down before impacting the frame of the pistol using Spring No. 1 (see fig. below) and Spring No. 2. The third spring (Spring No. 3) which is contained within the rod itself controls the movement of the slide so it never rams on the frame.

Compatible models:

• P365 – XMacro
  P365 – XMacro Tacops
  P365XL Spectre Comp 

DPM Mechanical Recoil Reduction System for SIG P365XL SPECTRE COMP & XMacro – SOFT VERSION-

The above DPM recoil system works due to the multi spring intricate and controls the functionality of the gun. Also included with the system are 4 powered external springs and 2 different sized spring plugs.  so the shooter can fine-tune the weapon for his/hers personal standards.These external spring have effect also in the total force of this recoil system. The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring.

Power Rates:

Slide on the battery:

Short Spring: 6.6lbs

Medium/Short Spring : 7.5 lbs

Medium/Long Spring: 8.4 lbs

Long Spring: 9.25 lbs

Total force – Slide full open position:

Short Plug: 16 lbs (Approx.)

Long Plug: 19 lbs (Approx.)

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

 

This recoil springs are a direct replacement for the stock recoil rod and does not change the configuration of the pistol.

The external springs are different in length with the longer offering heavier slide travel and locking than the shorter spring.

The washer is necessary to be installed always.

*Dimensions of the spring are the same as the original.