EOTECH Holographic sight HWS EXPS3™

$1,169

Add to Wishlist
Add to Wishlist

About the EOTECH Holographic sight HWS EXPS3™:

The HWS EXPS3™ is an excellent choice for professionals. The EXPS3 offers true two eyes open shooting for fast target acquisition, night vision compatible settings, and a 7mm raised quick detach base for lower 1/3 iron sight co-witness.
 

Advantages: 

  • Compatible with optical weapon sights
  • Increases the range of effectiveness of reflex sight
  • Windage and elevation knobs for precise alignment adjustment
  • Simple to attach – doesn’t interfere with firing
  • Designed for commercial and military markets

Included in the box:

  • HWS EXPS3™
  • Quick-Start Guide
  • Warranty Card
  • CR123 Battery
  • Protective Case

TECH SPECS:

Magnification 1x
Mount

1″ Weaver or MIL-STD-1913 rail

Weight

11.2oz (317.5g)

Length

3.8″ x  x (96.5 mm)

Width 2.3″ (58.4 mm)
Height  2.9″ (73.7 mm)
Windage & Elevation Adjustment

0.5 MOA per click

Brightness 20 daylight settings
10 additional settings for Gen I through III+ night vision devices
Water Resistant

33ft. (10 m) depth

Power Source

1 x CR123 battery

Battery Life

1,000 continuous hours at nominal setting 12 at room temperature

Operating Temperature

-40°F to 140°F (-40°C to 60°C)

Type of Reticle One dot Reticle
   
 

EOTECH One Dot Reticle

Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.

EOTECH HWS EXPS3

 
 
 
COMPATIBILITY
All Picatinny Rails
DIMESIONS
Weight
11 lbs
Width
2.3 in
Height
2.9 in
Length
3.8 in

Additional information

Weight 11 lbs
Dimensions 3.8 × 2.3 × 2.9 in
Country of Manufacture

Manufacturer

Material

Compatibility

You may also like…

Reviews

There are no reviews yet.

Be the first to review “EOTECH Holographic sight HWS EXPS3™”

Your email address will not be published. Required fields are marked *