DPM Special Edition For SIG P320-XTEN 10mm 5″ Barrel (Heavy Duty)

About the Special Edition For SIG P320-XTEN 10mm 5″ Barrel (Heavy Duty) Recoil Reduction Spring Rod by DPM Systems:

Will Fit: SIG P320-XTEN 10mm 5″ Barrel

Sig Sauer P320-XTEN 10mm 5″ Barrel Recoil Spring Assembly Instructions

The Special Edition For SIG P320-XTEN 10mm 5″ Barrel (Heavy Duty) Recoil Reduction Spring Rod by DPM Systems replaces the original factory guide rod/spring system and produces an advanced recoil reduction by absorbing the shock gradually and slowing the slide down before its impact with the frame of the pistol. Because the system is an interior modification of your pistol it will not change the external dimensions of the handgun, therefore there is no for a new holster, sights or any other accessory you own.

The DPM  Special Edition For SIG P320-XTEN 10mm 5″ Barrel (Heavy Duty) recoil spring system works due to its multi spring rod design (three springs) by producing an advanced recoil reduction technique by gradually slowing the slide down before impacting the frame of the pistol using Spring No. 1 (see fig. below) and Spring No. 2. The third spring (Spring No. 3) which is contained within the rod itself controls the movement of the slide so it never rams on the frame.

DPM Mechanical Recoil Reduction System for Sig Sauer P320-XTEN 10mm 5″ Barrel

The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun.

This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the pistol. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame.

Also included with the system are 3 Spring Plugs and 3 External Springs  so the user can fine-tune the weapon for his/hers personal standards. The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring. The Spring Plugs because of the different length change the total force of the recoil system (slide full open position).

The Spring Plug must always be installed when the DPM Recoil Rod and Springs are used.

Power Rates

Slide on the battery (idle position)

Short: 3.7 kg / 8.3 lbs
Medium: 4.1 kg / 9 lbs
Long: 4.4kg / 9.7 lbs

Total power (slide full open position)

Short Plug: 20 lbs approx.
Medium Plug: 24 lbs approx.
Long Plug:  28 lbs approx.

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

 

 

This recoil springs are a direct replacement for the stock recoil rod and does not change the configuration of the pistol.

The external springs are different in length with the longer offering heavier slide travel and locking than the shorter spring.

The washer is necessary to be installed always.

*Dimensions of the spring are the same as the original.